560 Pit Master Package

Fits Masterbuilt Gravity Series Smoker Model 560

Includes:

  • 1 Fire Box Mod
  • 1 Manifold Cover
  • 1 Water Pan
  • 4 Drip Pan Brackets
  • 1 Ash Bucket Grate
  • 1 Fan Protector Insert
  • 1 Hopper Cover
  • 1 560 Damper
  • 1 Grate Hook

$345

FREE Shipping to the Continental United States


PACKAGES WILL NOT BE SUBSTITUTED WITH OTHER PARTS. The 560 Pit Master Mod Package includes the fire box, manifold cover, water pan, drip pan brackets, ash bucket grate, fan protector insert, hopper cover, damper and grate hook for the Masterbuilt 560 Gravity Series Smoker. Please see individual item descriptions for more info on each item.

Some warping of the firebox mod is normal and should be expected. It will still protect the original plates behind the fire box mod. Due to the extreme conditions this unit is subjected to, there is no warranty on the firebox mod. All products may differ slightly from pictures.

Fire Box:

NEW DESIGN THAT MINIMIZES WARPING! This 12 gauge 304 stainless steel insert can be installed in Masterbuilt 560, 800, 900, and 1050 Gravity Series Smokers to help extend the life of the fire box. This insert helps prevent burn through of the original plates that come from the factory. Installation can be done in less than an hour and only requires a couple of common tools. Disassembly of the upper and lower hopper is required for installation. 

Some warping of the firebox mod is normal and should be expected. It will still protect the original plates behind the fire box mod. Due to the extreme conditions this unit is subjected to, there is no warranty on the firebox mod. All products may differ slightly from pictures.

560/600/800/900 Manifold Cover (Anti-Flare Lip):

The manifold cover is made of 20 gauge 304 stainless steel and is contoured to rest on top of the manifold on the Masterbuilt 560 or 800 Gravity Series Smoker. This cover helps control flare ups from grease when cooking. The long edges have a lip that catches grease before it can drop down in to the manifold burn area. It also makes clean up a snap. When done cooking, just lift the cover off and scrub it up rather than scraping and scrubbing the manifold it's self. The cover will help prolong the life of the manifold without restricting air flow or cooking temps. It will never rust. The manifold cover is a great addition to keep your grill clean!

The cover is not guaranteed to prevent all flare ups. All products may differ slightly from pictures.

560/600/800/900 Water Pan:

This stainless steel water pan sits snugly in place on top of the heat duct to the right of your manifold on the Masterbuilt 560 or 800 Gravity Series Smoker. Heat from the duct heats the solution in the water pan causing it to evaporate keeping moisture in your meat! Great for those low, slow cooks. The water pan can hold up to 5.4 cups and fits under the bottom grates taking up no cooking space.

Water pan pictured is a 1050 water pan. This water pan measures 12" long and does not span the entire width of the 800 model grill. All products may differ slightly from pictures.

Drip Pan Brackets (Holds 2 Pans):

These brackets work in conjunction with the manifold cover that has the anti-flare lip which allow you to put an aluminum drip pans under the bottom rack on your smoker. This product must be used with the manifold cover (not included). The brackets can be adjusted anywhere on top of the manifold cover. They allow use of aluminum pans up to 2" deep that will still fit under the bottom grate. Each set of brackets holds 1 drip pan.

This product must be used with the LSS Mods manifold cover. They will not work without using the manifold cover.

Ash Bucket Grate/Hopper Sear Grate and Fan Protector:

Use this kit to produce more smoke flavor! Install the ash bucket grate with the short side down and line it on top with wood chunks and watch the smoke roll. Your original charcoal grate lets the embers fall. The mod grate keeps the chunks from being buried in ash. Fan protector insert ensure no embers fall into your fan. All stainless steel of course and fits Masterbuilt 560, 800, and 1050 Gravity Series Smokers.

All products may differ slightly from pictures.

Grate Hook Multitool:

The grate hook multitool allows easy removal of the cast iron cooking grates. The cast iron grates are lifted in the middle of the grate allowing for good balance and easy lifting. And best of all it has a built in bottle opener! Stainless steel of course!

All products may differ slightly from pictures.

Hopper Cover:

New and improved hopper cover attaches directly to your hopper lid eliminating the need to grab a hot handle on the cover while cooking. Protects your hopper lid from damage. Comes with gasket material installed and instructions for installation.

All products may differ slightly from pictures.

560 Vent Damper:

Regulate heat and smoke loss to conserve charcoal with the vent damper. The damper is easily installed in less than a minute and and does not require drilling into your grill. It fits the Masterbuilt 560 Gravity Series Smoker. The damper also acts as a wind block to help maintain an even temperature on windy days. It adjusts easily and will not interfere with the cook chamber door. The damper is laser cut 304 stainless steel so it will not rust and you can clean it with pretty much whatever you want.

All products may differ slightly from pictures.

Related Products

560 Elite Mod Package

560 Elite Mod Package

$315 Free Shipping in USA

View Details

Firebox Inlet Grate

Firebox Inlet Grate

$50 Free Shipping in USA

View Details

560 Upper Cooking Racks (2)

560 Upper Cooking Racks (2)

$170 Free Shipping in USA

View Details

Hopper Cover

Hopper Cover

$50 Free Shipping in USA

View Details

560 Vent Damper

560 Vent Damper

$65 Free Shipping in USA

View Details